Quick hardening glue

Name: Quick hardening glue
Brand: Würth
SKU: 0892100111

Quick-setting glue
QCKSTGLU-WHITE-500G

Art.-no. 0892100111

EAN 4050641828545

All versions

Prices for customers after login

Quick hardening glue

Art.-no. 0892100111

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +66 2170 5099

Very quick hardening universal glue for gluing all types of wood

Quick to set

High degree of initial strength

Transparent when dry

Proof of Performance

Complies with stress group D2 according to DIN/EN 204 for gluing indoors with occasional brief exposure to water flowing off or condensation water.

Notice

Processing time, pressure and pressing time depend on the material, humidity, temperature and application quantity.

If the temperature is below 20°C, the pressing and processing time is longer

If the temperature is above 20°C, the pressing and processing time will be shorter

Complies with stress group D2 according to DIN/EN 204 for gluing indoors with occasional brief exposure to water flowing off or condensation water.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Gluing indoor doors

Indoor stairs and staircase railings

Surface gluing of laminated panels

Manual edge bonding

Assembly, surface, board-joint and block gluing

Joint, pin and dowel gluing in softwoods, hardwoods and exotic woods

Instructions

The substrate must be free from dust and grease as well as free from all kinds of dirt. Optimum wood moisture is between 8 and 12 %. Apply an even layer of glue on one side with a brush, spatula or glue roller. For more information, please refer to the technical data sheet.

Container	Bottle
Weight of content	500 g
Colour	White
Chemical basis	Polyvinyl acetate dispersion
pH value	5
Viscosity	10500 mPas
Viscosity conditions	Brookfield
Density	1.09 g/cm³
Min. proportion of solids	53 %
Min. film forming temperature	7 °C
Max. temperature resistance of the hardened material	70 °C
Shelf life from production	12 Month
Min./max. room temperature, material temperature and glue temperature	15 to 20 °C
Min./max. wood moisture	8-12 %
Min. wood moisture	8 %
Max. wood moisture	12 %
Min./max. open time	5-10 min
Conditions for open time	at 20°C and 150 g/m²
Max. pressing pressure	0.7 N/mm²

at 50°C	3–10 minutes
at 80°C	1–5 minutes
* The minimum pressing times are for the application conditions specified above. Deviations from the application conditions may decrease or increase the pressing time.