Multi-purpose grease IV - GRSE-(MULTIPURPOSE IV)-400G

Multi-purpose grease IV

Name: Multi-purpose grease IV
Brand: Würth
SKU: 0893107003

Multi-purpose grease, IV NSF
GRSE-(MULTIPURPOSE IV)-400G

Art.-no. 0893107003

EAN 4045727103012

All versions

Similar products

Prices for customers after login

Multi-purpose grease IV

Art.-no. 0893107003

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +66 2170 5099

Synthetic high-performance grease with white solid lubricants

Suitable for food-contact areas

EP additives for high pressure resistance

Excellent dry-running properties

Good sealing effect and corrosion protection

Notice

Greases are delivered in plastic cartridges! The plastic cartridges improve storage (they prevent the grease from oozing out at high temperature). Store cartridges upright in a cool, dry place! The operating instructions of the vehicle, machinery and assembly manufacturers must be observed.

NSF H1-registered (no.: 135924), meets the requirements of USDA 1998 H1. The product may come into contact with foodstuffs for technical reasons.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Synthetic high-performance grease with white solid lubricants for the food industry.

Instructions

Clean the lubricating point thoroughly before filling for the first time. Apply a thin and even coat to the parts to be lubricated. Observe the bearing manufacturer's specifications! Avoid mixing with other greases wherever possible. If used in areas in which food is processed or stored, only the minimum quantity technically necessary may be used.

Weight of content	0.4 kg
Container	Cartridge
Soap base	AL complex
Lubricant code	KPFHC2R-40
Min./max. temperature conditions	-45 to 180 °C
Colour	White
NLGI grade/conditions	2 / with DIN 51818
Base oil viscosity, kinematic/conditions	350 mm²/s / at 40°C
Min. dripping point/conditions	250 °C / in accordance with DIN ISO 2176
Min./max. worked penetration /conditions	285 x 0.1 mm-285 x 0.1 mm / in accordance with DIN ISO 2137
Corrosion protection period/category	Corrosion category 0
VKA welding load	3000 N
Shelf life from production	24 Month
Oil basis	Synthetic
Lubricant system	Grease
Smell/fragrance	Characteristic
Density	0.981 g/cm³
Density conditions	at 20°C
Conditions for viscosity of oil basis	at 40°C
Dripping point conditions	in accordance with DIN ISO 2176
Min. temperature conditions	-45 °C
Max. temperature conditions	180 °C
Max. short-term temperature resistance	200 °C
Worked penetration conditions	in accordance with DIN ISO 2137
Conditions for NLGI grade	with DIN 51818
Corrosion protection period conditions	in accordance with DIN 51802, SKF Emcor test
Conditions for VKA welding load	in accordance with DIN 51350-4, VKA test (Institute for Internal Combustion Engines)
Resin-free	Yes
Silicone-free	Yes
Acid-free	Yes
AOX-free	Yes
Free from heavy metals	Yes
Chloric	No
Resistance against	Water Salt water Acid Lye

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.