Welcome to Würth Thailand For trade customers only

Exclusively for business customers

More than 100,000 products

Quick service

Cash payment

To order please add Line : @wuerth or Tel.02 170 5099

Liquid Metal Fe 1

Liquid Metal Fe1
LIQUMET-FE1-500G

Art.-no. 0893449
EAN 4011231896009
Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

Fast-acting repair system, ideal for installers and workshops in the metal processing sector.
  • High-quality two-component reaction resin system that exhibits characteristics similar to those of metal due to its special formula

  • The ideal mixing ratio of the components (A:B = 1:1, pressing out two strands of the same length from the tubes) makes incorrect mixing of the repair compound virtually impossible

  • Specifically designed for smaller repair jobs where a quick turnaround is required

  • Can be applied with a spatula and does not run, which also makes vertical application possible

  • After hardening, Liquid Metal Fe1 can easily be processed in the same way as metal with lathing, milling, drilling, filing or thread cutting

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Liquid Metal Fe 1 is a solvent-free, two-component substance that can be used to repair metallic and ceramic materials.


Particularly suitable for filling moulds, and for sealing and covering leaking areas.

Instructions

The application surfaces must be clean, dry and free of grease. For pre-treatment, refer to the technical data sheet.


Mix components A and B homogeneously 1:1. Apply the mixture immediately with a spatula (short pot life).


Please note the enclosed application instructions.

Mixing ratio

Component A: Component B = 1:1

Density

2.8 kg/m³

Density conditions

Components A and B mixed

Colour

Grey

Min./max. gelation time

7-12 min

Min./max. curing time

4-24 h

Fully hardening/curing conditions

Room temperature

Conditions for gelation time

at room temperature

Working life

5 min

Conditions for working life

at 20°C, 20 g total mass

Viscosity/consistency

Pasty

Min. tensile strength

12.5 N/mm²

Min. combined tension and shear resistance

14.5 N/mm²

Coefficient of thermal expansion

0.0004 1/K

Min. compressive strength

70 N/mm²

Min./max. temperature resistance of the hardened material

-60 to 120 °C

Weight of content

500 g

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information