Leak detector

Name: Leak detector
Brand: Würth
SKU: 089020

Leak detector
LKDETR-AEROSOLCAN-400ML

Art.-no. 089020

EAN 4011231893435

All versions

Similar products

Prices for customers after login

Leak detector

Art.-no. 089020

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +66 2170 5099

Detects leaking areas in compressed air and gas systems

Effortless, time-saving detection of pressurised, leaking areas with success guaranteed

Non-flammable, therefore can also be used on systems, containers and pipes with flammable gases

Processing temperature: +5°C to +50°C

Freezes at 0°C

Notice

Is resistant to frost, can be applied again once thawed.

When using with systems containing oxygen, it must be ensured that these are constantly pressurised during testing. If not, low pressure could result in the leak-finding fluid entering the system and reacting with the oxygen. Rinse residual leak-finding fluid out with clear water immediately after testing.

Only spray suspected areas lightly; leaks are shown by foam forming

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Suitable for compressed air brake systems, tyres, hoses, valves, pipework, fittings, compressed air containers, compression systems etc.

Contents	0.4 l
Colour	Colourless
Smell/fragrance	Product-typical
Chemical basis	Water, soap and glycol
Shelf life from production	24 Month
Min. temperature conditions	5 °C
Max. temperature conditions	40 °C
Surface tension	0.02 N/m
Density	1 g/cm³
Density/conditions	1 g/cm³ / at 20°C
pH value	6.5-7.5

Suitable glove:

Product

Description

Chemical protective glove chloroprene

Description:

Permeation level: 4

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.