Insect remover

Name: Insect remover
Brand: Würth
SKU: 5861900007

INSEREM-400ML

Art.-no. 5861900007

EAN 4065746689038

All versions

Individual price display after login

Insect remover

Art.-no. 5861900007

Individual price display after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +66 2170 5099

Special cleaner for removing insect residues on glass, paint, chrome and plastic surfaces.

The deep-acting and effective formula quickly and gently removes even stubborn and dried insect soiling

Gentle on materials - does not attack the surface

Ideal for using before you wash your car

Silicone-free

Notice

Do not apply on hot surfaces or in direct sunlight. The recommended processing temperature is 10°C-25°C. Protect from frost.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For cleaning windscreens, windows, radiator grilles, bumpers, headlights, licence plates etc. affected by insect residues.

Instructions

Apply the insect remover evenly to contaminated surfaces. Allow the product to take effect for approx. five minutes, remove stubborn dirt with a damp cloth or sponge and rinse thoroughly with clean water. If necessary, wash as usual or use a car wash. To prevent scratches, quickly rinse off especially heavy road dirt before actually cleaning the area.

Shelf life from production

24 Month

Suitable glove:

Product

Description

Vinyl chemical and moisture protective glove

Description:

Permeation level: 6

Fully dipped protective glove with vinyl coating on cotton jersey lining

Nitrile chemical protective glove

Description:

Permeation level: 6

With cotton velour finish inside.

Chemical protective glove chloroprene

Description:

Permeation level: 6

Heavy-duty design

Disposable nitrile glove

Description:

Permeation level: 4

Liquid-proof, food-safe disposable glove

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.