Food-grade silicone acetate - SILSEAL-ACE-FOODGRADE-CLEAR-310ML

Food-grade silicone acetate

Name: Food-grade silicone acetate
Brand: Würth
SKU: 08925501

Acetate food grade
SILSEAL-ACE-FOODGRADE-CLEAR-310ML

Art.-no. 08925501

EAN 4045727706282

All versions

Similar products

Prices for customers after login

Food-grade silicone acetate

Art.-no. 08925501

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +66 2170 5099

Special, high-quality sealant for sealing in food processing and drinking water sector, as well as for aquarium construction

Tested product characteristics

Meets the requirements of NSF/ANSI Standard 61

Sensor testing for food

Tested by Stegmann Laboratory

Can be used in food handling and processing operations

Tested by ISEGA-Forschungs- und Untersuchungsgesellschaft mbH Aschaffenburg (Germany)

In aquarium construction

Can be used in the drinking water sector

KTW test (contact of drinking water with non-metallic materials) by The Ruhr District Institute of Hygiene in Gelsenkirchen (Germany)

In drinking water sector

DVGW Worksheet W 270 – Hygiene Institute of the Ruhr Region, Gelsenkirchen

Resistant to micro-organisms

In cleanrooms

Adheres to a wide variety of materials

Adhesion to a range of substrates present in the food processing sector

Also adheres to artificial stone

High degree of resistance to chemicals

Good smoothing properties

Building material class B2 according to DIN 4102

Notice

As a general rule, in line with DIN 52452 Part 4, sealants should not be painted over

Remove excess smoothing agent from surfaces

Please observe the "General Notes on Application for Sealants" overview sheet. Further information in the technical data sheet.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For sealing joints that come into contact with drinking water or food, e.g. in commercial kitchens, butcher's shops, breweries, on sales counters and in walk-in refrigerators and for aquarium construction.

Instructions

The surface must be load-bearing, clean, dry and free from grease, rust and water

Do not use in heavy rain

The joint dimensions must be observed

Prime the joints with PE back-fill material

A primer, e.g. with Silicone primer, improves the adhesion for absorbent or porous surfaces

Smoothing agents must only be used before the skin formation time and must be completely levelled after use with a smoothing tool. Excess product next to the joint must also be removed immediately, otherwise staining may occur.

Please observe the "General Notes on Application for Sealants" overview sheet. Further information in the technical data sheet.

Container	Cartridge
Contents	310 ml
Chemical basis	Sauer silicones (acetate systems)
Colour	Transparent
Continuous motion absorption	25 %
Shore A hardness	16 +/- 2
Min./max. processing temperature	5 to 40 °C
Min./max. temperature resistance	-40 to 180 °C
Min./max. full curing speed /conditions	2-3 mm/d / 23°C and 50% relative humidity
Min. skin-formation time	12 min
Conditions for skin-formation time	at 23°C and 50% relative humidity
Full curing speed/conditions	3 mm/d / 23°C and 50% relative humidity
Min. breaking elongation	500 %
Fungicidal properties	No
Building material class	B2 - Normally inflammable
Shelf life from production	18 Month
Building material class/conditions	B2 - Normally inflammable / in accordance with DIN 4102
Density/conditions	1.04 g/cm³ / at 20°C
Density	1.04 g/cm³

Suitable glove:

Product

Description

Chemical protective glove chloroprene

Description:

Permeation level: 3

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.