BMF workshop cleaner - WRKSHPCLNR-BMF-5LTR

BMF workshop cleaner

Name: BMF workshop cleaner
Brand: Würth
SKU: 08931182

Workshop cleaner BMF
WRKSHPCLNR-BMF-5LTR

Art.-no. 08931182

EAN 4046777760798

All versions

Prices for customers after login

BMF workshop cleaner

Art.-no. 08931182

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +66 2170 5099

Environmentally friendly cleaner for workshops, machinery and vehicles

No phosphates, solvents or corrosive substances

Can be used mechanically, manually or in high-pressure devices

Powerful at dissolving greases, yet mild and gentle on materials

Does not attack paints, rubber or plastics

pH value: 9.4

Silicone-free

AOX-free

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For cleaning all water-resistant surfaces.

Instructions

Dilute the product with water, then apply to the soiled area. Leave to work for a brief time, then wipe off or rinse with water.

Warm water increases the cleaning effect.

Application concentration: Manual 3-50 %; high-pressure device 3-5 %; floor cleaning machines 3-10 %.

Contents	5 l
Chemical basis	Alkaline tenside
Smell/fragrance	Fruity
Colour	Luminous yellow
pH-neutral	No
pH value	9.4
Density	1.04 g/cm³
Shelf life from production	24 Month
Density conditions	at 20°C
AOX-free	Yes
Silicone-free	Yes
Bio-degradable	Yes
Container	Canister
Weight of content	5.2 kg

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 4

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.