Exclusively for business customers
More than 100,000 products
Quick service
Cash payment
Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
Sanding fleece matting body
MATBDY-FLC-G100-40X30X6MM
Register now and access more than 125,000 products
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 40 x 30 x 6 mm |
Max. rotation speed | 12000 1/min |
Max. recommended rotation speed | 6000 1/min |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Sandpaper, waterproof
1/2 inch impact socket wrench insert DIN 3121/ISO 1174
Multifunctional Cleaning Borescope
Special steel cutting wire
T-handle wrench, hexagon socket With side tip
Metric double open-end wrench DIN 3110/ISO 1085
Twist Drill bit HSCO ASME B94.11M TYPE RN
Multi-socket wrench 1/4 inch Assortment of 33 pieces
Pneumatic impact screwdriver DSS 1/2 inch Premium Power
Ball peen hammer Hickory handle