Exclusively for business customers
More than 100,000 products
Quick service
Cash payment
1C installation foam PUR B2
1C assembly foam PUR B2
ASMBYFM-1C-PU-B2-AT3-750ML
Register now and access more than 125,000 products
- Good results
- High level of heat and sound insulation
- Good spraying properties
- Very good adhesion to many surfaces except PTFE, PE and PP
- Building material class B2 in accordance with DIN 4102
- CFC free
Hardened PU foam should be protected against UV exposure by painting over or sealing with e.g. silicone, polyurethane, acrylic or MS polymer.
Datasheets(X)
Insulation, assembly and foam filling of window and door frames and windowsills, foam filling of cavities such as wall openings, roof finishings, door casings, pipe ducts or roller shutter boxes.
The adhesion surfaces must be clean, dry and load-bearing. Slight moistening of the surface improves adhesion and hardening, as well as the cell structure of the foam. Screw the can tightly onto the thread of the can and shake the pistol well around 30 times so that the can contents are mixed and an optimal foam quality is achieved. Adjust the foam bead with the setting screw and spray the foam out using the trigger. Only fill joints and cavities up to a third as the foam will expand. Cut off any excess, fully hardened foam with a knife.
Chemical basis | Polyurethane |
Smell/fragrance | Characteristic |
Can be cut after | 30 min |
Min. processing temperature | 5 °C |
Max. processing temperature | 25 °C |
Contents | 750 ml |
Building material class | B2 - Normally inflammable |
Shelf life from production | 12 Month |
Last viewed
1/4 inch socket wrench insert, metric short
Combination wrench, angled
Protective glove Construct
Scraper blade
Assembly glove Economy
U-shaped cutting knife
Nitrile chemical protective glove With cotton velour finish inside
1/2 inch socket wrench insert metric, hexagon, short
1/2 inch socket wrench insert metric, hexagon, short
Metric double box-end wrench with POWERDRIV®